Product Information
Fabrics *
PANEX® 30 woven carbon fiber fabrics made from spun yarn that is tailored for a variety of finished composite thicknesses. These fabrics have high cross-ply tensile and interlaminar shear strengths in composite materials. Another advantage of these fabrics is their contour conformation without wrinkling. PANEX® 30 fabrics are thermally stable and chemically pure with low oxidation rates.
Applications of PANEX® 30 woven fabrics include carbon-carbon composites and other processes where chemical vapor infiltration or prepregging is required.
| Description | Construction | Area Weight | Roll Widths | Binder | Data Sheet |
|---|---|---|---|---|---|
| Carbonized Woven Fabric | Plain Weave | 115 g/m2 (3.4 oz/yd2) |
81 - 88 cm (32 – 35 in) |
None |  |
| Plain Weave | 220 g/m2 (6.5 oz/yd2) |
109 cm (43 in) |
None | ||
| 8 Harness Satin Weave | 288 g/m2 (8.5 oz/yd2) |
84,107 cm (33, 42 in.) |
None | ||
| Single Knit Jersey Fabric 7 oz | 250 g/m2 (7.5 oz/yd2) |
56 cm (22 in) |
None | |
|
| Carbonized SCRIM Fabric | SCRIM Plain Leno Weave | 37 g/m2 (1.3 oz/yd2) |
99 cm (39 in) |
Acrylic Latex EVC | |
* carbonized fabric sheets available upon requests
Yarns *
PANEX® 30 carbon fiber yarns are >99% carbonized and have a density of 1.75 g/cc. These yarns are characterized by their many surface fibrils protruding in various directions, making them ideally suited for high performance applications including carbon/carbon and other refractory composites.
| Description | Plies | Linear Mass Density | Yield | Data Sheet | Packaging | |
|---|---|---|---|---|---|---|
| Denier (g/9000m) | Tex (g/1000m) | |||||
| Carbonized Yarn | 2 | 1700 | 189 | 5.76 m/g (2854 yds/lb) |
|
Conical spools Maximum diameter = 12 cm (4.75 in) Height = 15 cm (6 in) |
| 3 | 2500 | 278 | 3.55 m/g (1758 yds/lb) |
|||
| 4 | 3400 | 378 | 2.59 m/g (1285 yds/lb) |
|||
| 5 | 4200 | 467 | 2.05 m/g (1016 yds/lb) |
|||
| 6 | 5000 | 556 | 1.78 m/g (884 yds/lb) |
|||
| 7 | 5900 | 656 | 1.51 m/g (750 yds/lb) |
|||
| 10 | 8400 | 933 | 1.06 m/g (527 yds/lb) |
|||
* custom yarn thicknesses are available upon request
Roving
PANEX® 30 ROVING is manufactured with high twist to improve its handling characteristics. The roving is widely used as a baseline material for the manufacture of friction clutches and brakes. Thick fabrics woven of PANE® 30 HIGH TWIST ROVING allow for efficient buildup during fabrication of composite substructures.
| Description | Carbon Content | Yield | Typical Properties | Dtex | Data Sheet | |
|---|---|---|---|---|---|---|
| Strength | Modulus | |||||
| High Twist Roving | 99% | 2.01 m/g (1,000 yds/lb) |
1,552 MPa (225 Ksi) |
221 Gpa (32 Msi) |
1.7 | |
Felts *
Zoltek’s needlepunched felt is produced from PYRON® oxidized PAN fibers and later carbonized to >99% carbon content in our vacuum furnaces. Current applications include filtration media in high temperature and/or corrosive environments and energy storage. The unique properties of our PANEX® 30 carbon felts are optimal for complex thermal, corrosive or conductive applications.
| Description | Construction | Carbon Content | Roll Widths | Typical Thickness | Data Sheet |
|---|---|---|---|---|---|
| Carbonized Felt | Needlepunch | 99% | 94 cm (36 in) |
9 mm (0.4 in) |
|
* custom products available upon request